Troubleshooting a Noisy Drivetrain. Nothing clunks on a bike on purpose so you know something’s wrong. A creak with every pedal rotation coming from shoes/pedals traced to cleat pedal interface. I have put the bike no the stand and pedald by hand but no clicking. There are two possible sources of this noise, as you’ve described it: 1. If you have a newer bike that has a direct mount chainring, I’ve found that it may be under torqued from factory causing a tiny bit of play and noise, too. Will make the noises in any gear I'm pretty sure, with the possible exceptions of smallest cog or 2 maybe - I'm never in those for long so I'm not sure. This article will discuss troubleshooting creaky or noisy drivetrains. I've heard everything from these solutions to seat posts, headsets, and maybe sunspots. When I do get the noise, and it stays ongoing, it seems that if I let the pedals freewheel or back pedal a 1/2 crank or so then resume pedaling the noise / clunking is gone (till the next time). Why is My Bike Making a Creaking Noise When Pedaling?

Bike condition diagnosis - 'knocking' in the pedals/bottom bracket once per revolution Please let me know if there is a bike problems subreddit or something. 1 ... it is probably located in the crankset and pedal area. Why Does Your Bike Make That CLUNKing Sound When You Pedal? Latest: Greatest: Lobby: ... because the chain would keep turning even when you aren't pedaling, so it would make the noise all the time. cleaned and lubed the chain, the clunking noise started, removed the rear wheel, put it back on and the clunking is worse. My girlfriends bike (which we bought a few months ago off wiggle.com) has developed a 'knocking' which occurs once per revolution of the pedals and I'm trying to a) diagnose the problem and b) decide what to do.

Since you say it only happens when you pedal, it's probably the bearing in your sprocket hub--the hub the pedals are attached to. there is no lock or kick stand , its not the chain ring have a bent teeth. Disturbing clicking/grinding noise under load when pedalling? In general, your bike should not be making a lot of noise. A creaking developed when pedaling hard up hills in the saddle, and went away when out of the saddle. The noise … Written by Peter Taylor. There is a VERY audible clunking noise while pedaling, but not while coasting. The noise would speed up when you pedal faster, too.

Happens while I'm pedaling but NOT when I'm just coasting. That one was tricky to spot, but is a good reminder that proper tightening of components to spec, but not overtightening, is important. Your exercise bike owner's manual may outline a few noise problems you may experience when using the exercise bike. Solution: Problem resolved when grease applied to carbon seatpost. This noise is very loud (and frankly, quite annoying). Seems only when I am driving the crank with my feet the extra pressure makes it happen. Second, if you’re worried about the shop not being able to recreate the noise on the stand, don’t sweat it – keep riding, it’s bound to get worse. My girlfriends bike (which we bought a few months ago off wiggle.com) has developed a 'knocking' which occurs once per revolution of the pedals and I'm trying to a) diagnose the problem and b) decide what to do.